Dell POWEREDGE 4300 Installatie-informatie - Pagina 5

Blader online of download pdf Installatie-informatie voor {categorie_naam} Dell POWEREDGE 4300. Dell POWEREDGE 4300 6 pagina's. System board upgrade
Ook voor Dell POWEREDGE 4300: Installatie-informatie (6 pagina's), Installatiehandleiding (28 pagina's), Installatie rek (37 pagina's), Upgrade installatiehandleiding (14 pagina's), Installatie rek (34 pagina's), Upgrade handleiding (23 pagina's), Upgrade handleiding (24 pagina's), Handleiding voor installatie-instructies (12 pagina's), Vervangingshandleiding (3 pagina's), Installatiehandleiding (14 pagina's)

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH6&6,&DEOH

NOTE: The SCSI cable installation described in this document is a typical installation

of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable

differently, depending on redundant arrays of independent disks (RAID) configurations

and the existence of SCSI peripheral cards. Refer to your operating system documen-

tation for information on how to set up your SCSI devices.

To install the SCSI cable to the 1 x 2 backplane, perform the following steps:

In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has

two connectors at one end and one connector on the other end. See Figure 3.)

bottom drive

connector

SCSI cable

)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5

top drive connector

SCSI controller

on system board