Dell POWEREDGE 4300 Informations sur l'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Informations sur l'installation pour {nom_de_la_catégorie} Dell POWEREDGE 4300. Dell POWEREDGE 4300 6 pages. System board upgrade
Également pour Dell POWEREDGE 4300 : Informations sur l'installation (6 pages), Manuel d'installation (28 pages), Installation du rack (37 pages), Manuel d'installation de la mise à niveau (14 pages), Installation du rack (34 pages), Manuel de mise à jour (23 pages), Manuel de mise à jour (24 pages), Manuel d'instructions d'installation (12 pages), Manuel de remplacement (3 pages), Manuel d'installation (14 pages)

All manuals and user guides at all-guides.com

,QVWDOOLQJWKH6&6,&DEOH

NOTE: The SCSI cable installation described in this document is a typical installation

of the SCSI cable used with the 1 x 2 backplane. You can install the SCSI cable

differently, depending on redundant arrays of independent disks (RAID) configurations

and the existence of SCSI peripheral cards. Refer to your operating system documen-

tation for information on how to set up your SCSI devices.

To install the SCSI cable to the 1 x 2 backplane, perform the following steps:

In the customer kit, locate the nonterminated 68-pin SCSI cable. (This cable has

two connectors at one end and one connector on the other end. See Figure 3.)

bottom drive

connector

SCSI cable

)LJXUH,QVWDOOLQJWKH6&6,&DEOHWR[%DFNSODQH

Dell PowerEdge 6300 and 4300 Systems 1 x 2 Backplane Installation Information5

top drive connector

SCSI controller

on system board