Dell PowerEdge 4400 Rack Installation - Page 21

Browse online or download pdf Rack Installation for Server Dell PowerEdge 4400. Dell PowerEdge 4400 34 pages. Wake-on-lan (wol) support on dell servers
Also for Dell PowerEdge 4400: Installation Manual (42 pages), Installation Manual (20 pages), Installation Manual (28 pages), Rack Installation (37 pages), Update Manual (8 pages), Information Update (8 pages), User Manual (42 pages), Hardware Installation Manual (40 pages), Installation Manual (36 pages), Manual (15 pages)

Print Page
Dell PowerEdge 4400 Rack Installation
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
hinge insert

Figure 5. Removing the 24-U Rack Doors

CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
If you want to reverse the door so that the handle is on the other side, perform the fol-
lowing steps:
1.
With the door open, lift out and fully retract all hinge pins.
2.
Remove the hinges and door brackets from the door frame.
3.
Replace the hinges and door brackets on the opposite side and switch the posi-
tion of the handle.
4.
Replace the rack door (see the section, "Replacing the Rack Doors," found later
in this guide).
DELL CONFIDENTIAL - Preliminary
hinge pin
hinge
9/8/00
Rack Installation Guide
7