Dell PowerEdge FD332 Owner's Manual - Page 13

Browse online or download pdf Owner's Manual for Server Dell PowerEdge FD332. Dell PowerEdge FD332 46 pages.
Also for Dell PowerEdge FD332: Getting Started (2 pages)

Print Page
Dell PowerEdge FD332 Owner's Manual
Figure 6. Single PERC/HBA joined mode mapping configuration—four-bay chassis (one compute sled)
Figure 7. Single PERC/HBA joined mode mapping configuration—six-bay chassis
Figure 8. Single PERC/HBA joined mode mapping configuration—three-bay chassis

Split mode mapping configurations

CAUTION:
Changing the storage sled mapping configuration from Joined mode to Split mode can result in loss of configuration
and/or loss of access to hard drives/SSDs.
NOTE:
When changing the mapping configuration from Joined mode to Split mode, the secondary controller is powered on. It is
recommended that you run the latest PERC/HBA firmware Dell Update Package (DUP) to ensure that both controllers are
running the latest firmware.
The split mode mapping configurations apply to the following:
•
The storage sled supports a storage controller module with dual PERC/HBA controllers.
•
Both controllers are enabled by setting the Storage Mode to split mode in the CMC interface.
In the split mode, eight hard drives/SSDs are mapped to each controller. Hard drives/SSDs in slots 0 to 7 map to controller 1 or primary
controller, and hard drives/SSDs in slots 8 to 15 map to controller 2. For more information, see
There are two split mode options available in the CMC interface:
•
Split Single Host mode
•
Split Dual Host mode
Drive to storage controller
Storage sled mapping configurations
mapping.
13