Dell EMC PowerStore Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Storage Dell EMC PowerStore. Dell EMC PowerStore 8 pages.
Also for Dell EMC PowerStore: Quick Start Manual (8 pages)
Print Page
If you are using the PowerStore T Model appliance:
Cable the management interface on both nodes to a management switch or
Note: You will require two additional network cables to complete this step.
Note: For more detailed instructions on recommended networking configurations, including how to
configure PowerStore T with top-of-rack switches, see the
PowerStore T Models
determine which ports on your switches to use.
If you are using the PowerStore X Model appliance:
Using the supplied cables:
Connect the network cables on node A:
Connect the network cables on node B:
Note: These instructions show a minimum cabling configuration. For more detailed instructions on
recommended networking configurations, see the
at https://dell.com/powerstoredocs. Check with your network administrator to determine which ports on
your switches to use.
Dell EMC PowerStore Quick Start Guide
at
https://dell.com/powerstoredocs.
a.
Port 0 of the embedded module connects to switch 1.
b.
Port 1 of the embedded module connects to switch 2.
a.
Port 0 of the embedded module connects to switch 2.
b.
Port 1 of the embedded module connects to switch 1.
network.
PowerStore Networking Guide for
Check with your network administrator to
PowerStore Networking Guide for PowerStore X Models
Page 5 of 8