ENSTROM F-28F Series Float Installation Instructions - Page 3

Browse online or download pdf Float Installation Instructions for Toy ENSTROM F-28F Series. ENSTROM F-28F Series 6 pages.

ENSTROM F28F/280F SERIES FLOAT INSTALLATION INSTRUCTIONS
2. Turn bracket toward bottom of landing gear leg.
3. Place small bar (i.e. 7/8") into wheel axle hole and light tap bar to remove bracket
(Figure 3).
D. Remove landing gear drag strut and hardware.
1. Remove belly panel to gain access to drag strut.
2.
With hoist, take up adequate weight of the helicopter to remove the drag struts.
3.
Remove drag struts (Figure 4).
E. Slightly inflate floats (inflate each compartment) half to three-quarters full.
Figure 3. Bracket Removal
Figure 4. Drag Strut Removal
2
Oct 14/08