ENSTROM F-28F Series 플로트 설치 지침 - 페이지 3

{카테고리_이름} ENSTROM F-28F Series에 대한 플로트 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ENSTROM F-28F Series 6 페이지.

ENSTROM F28F/280F SERIES FLOAT INSTALLATION INSTRUCTIONS
2. Turn bracket toward bottom of landing gear leg.
3. Place small bar (i.e. 7/8") into wheel axle hole and light tap bar to remove bracket
(Figure 3).
D. Remove landing gear drag strut and hardware.
1. Remove belly panel to gain access to drag strut.
2.
With hoist, take up adequate weight of the helicopter to remove the drag struts.
3.
Remove drag struts (Figure 4).
E. Slightly inflate floats (inflate each compartment) half to three-quarters full.
Figure 3. Bracket Removal
Figure 4. Drag Strut Removal
2
Oct 14/08