Dell PowerVault MD3060e Series Owner's Manual - Page 31

Browse online or download pdf Owner's Manual for Storage Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 40 pages. Storage enclosure
Also for Dell PowerVault MD3060e Series: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Deployment Manual (24 pages), Administrator's Manual (35 pages), Getting Started Manual (10 pages), Deployment Manual (24 pages), Administrator's Manual (48 pages), Setting Up (2 pages)

Print Page
Dell PowerVault MD3060e Series Owner's Manual
Figure 19. Removing and Installing the power supply module
1.
power supply

Installing A Power Supply Module

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that the power switch on the power supply module that you are installing, is in the off position.
1.
Slide the new power supply module into the chassis until the power supply module is fully seated.
2.
Rotate both the release lever toward the chassis until the power supply module locks into place.
3.
Connect the power cable to the power supply module and plug the cable into a power outlet.
CAUTION: When connecting the power cable, secure the cable with the cable securing
bracket.
NOTE: When installing or hot-swapping a new power supply module, allow several seconds for
the system to recognize the power supply module and determine its status. The power-supply
status indicator turns green to signify that the power supply module is functioning properly.
2.
release latch (2)
31