Dell PowerVault MD3060e Series Gebruikershandleiding - Pagina 31

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 40 pagina's. Storage enclosure
Ook voor Dell PowerVault MD3060e Series: Handleiding voor hardware en software (25 pagina's), Installatiehandleiding (11 pagina's), Aan de slag handleiding (10 pagina's), Informatie-update (8 pagina's), Instructies voor installatie van het rek (2 pagina's), Instellen (2 pagina's), Uitrolhandleiding (24 pagina's), Handleiding voor beheerders (35 pagina's), Aan de slag handleiding (10 pagina's), Uitrolhandleiding (24 pagina's), Handleiding voor beheerders (48 pagina's), Instellen (2 pagina's)

Figure 19. Removing and Installing the power supply module

power supply

Installing A Power Supply Module

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

Ensure that the power switch on the power supply module that you are installing, is in the off position.

Slide the new power supply module into the chassis until the power supply module is fully seated.

Rotate both the release lever toward the chassis until the power supply module locks into place.

Connect the power cable to the power supply module and plug the cable into a power outlet.

CAUTION: When connecting the power cable, secure the cable with the cable securing

bracket.

NOTE: When installing or hot-swapping a new power supply module, allow several seconds for

the system to recognize the power supply module and determine its status. The power-supply

status indicator turns green to signify that the power supply module is functioning properly.

release latch (2)