Dell PowerVault NX1950 Installation And Troubleshooting Manual - Page 40

Browse online or download pdf Installation And Troubleshooting Manual for Storage Dell PowerVault NX1950. Dell PowerVault NX1950 48 pages. For vmware esx server software
Also for Dell PowerVault NX1950: Deployment Manual (34 pages), Important Information Manual (26 pages), Getting Started (49 pages), Deployment Manual (38 pages), Upgrade Manual (18 pages), Reference Manual (4 pages), Setting Up (2 pages), Using (2 pages), Configuration Manual (11 pages)

Print Page

•

Use the Cluster Administrator to delete the LUN. Start the Cluster

Administrator and then change the disk associated with the cluster to offline.

NOTE:

Management Console, but the LUN has been deleted.

Dell Storage Initialization Wizard and

Array Name

The Dell Storage Initialization Wizard in the Integrated Solution with the

PowerVault MD3000 storage array configures the cluster nodes and the

storage array for the PowerVault NX1950 cluster solution. When you are

configuring the cluster, ensure that the array name is persistent across both

nodes. If the array name is changed on one node and the change is not

replicated across the second node, the node without the change encounters

Virtual Disk Service (VDS) provider issues.

If a Node is Configured With iSCSI LUNs Before

Joining the Cluster, the iSCSI Target MMC

Snap-in Crashes

If iSCSI LUNs are configured on your PowerVault NX1950 storage system and

you are upgrading the operating system from Microsoft

Data Storage Server 2003 Standard Edition to Windows Unified Data

Storage Server 2003 Enterprise Edition, you must follow the procedure

described in the Dell PowerVault NX1950 Systems Important Information

Guide located on the Dell Support website at support.dell.com.

Connection to the iSCSI LUN is Lost When a

Cluster Failover Occurs

If the Microsoft iSCSI Software Initiator is not configured properly, the

network settings for the Microsoft iSCSI Target may be reset when a resource

group fails. To re-establish connection to the iSCSI LUN, follow the

procedure described in the Dell PowerVault NX1950 Systems Important

Information Guide located on the Dell Support website at support.dell.com.

Important Information

This action reports an error message from the PowerVault NX1950

Windows

Unified