Dell PowerVault TL4000 Getting Started - Page 21

Browse online or download pdf Getting Started for Storage Dell PowerVault TL4000. Dell PowerVault TL4000 38 pages. Tape library
Also for Dell PowerVault TL4000: Release Notes (3 pages), Faq (26 pages), Quick Start Manual (7 pages), Software Manual (16 pages), Configuration Manual (22 pages), Important Information Manual (10 pages), User Manual Addendum (2 pages), Getting Started Manual (3 pages), Attachment Instructions (17 pages), Brochure (4 pages), User Manual (20 pages)

Print Page
Dell PowerVault TL4000 Getting Started
Figure 1-13. Attaching a SCSI host interface cable to the 2U library
Figure 1-14. Attaching host interface cables to the 4U library. THE CONFIGURATION SHOWN IN THIS FIGURE IS
USED FOR EXAMPLE ONLY. THIS CONFIGURATION IS NOT SUPPORTED.
Figure 1-15. Attaching a SAS interface cable to the 2U library
3. Attach the other end of the host interface cable as follows:
1
4
1
3
4
1
2
v For a SCSI library, connect the host interface cable to the connector on the
SCSI host bus adapter or to the connector on the previous device on the SCSI
bus. Attach the terminator (
connector on the back panel of the library, if the library is the last or only
3
5
3
in Figure 1-13) to the remaining SCSI
2
2
3
Installation
1-11