Dell Force10 S4820T System Getting Started Manual - Page 22

Browse online or download pdf Getting Started Manual for Switch Dell Force10 S4820T System. Dell Force10 S4820T System 39 pages.

Print Page

Two-post Flush-mount Configuration:

1 For this configuration, you must remove the castings from the front side of

each ReadyRails assembly. Refer to Figure 1-6, item 1. Use a Torx driver to

remove the two screws from each front flange ear (on the switch side of the

rail) and remove each casting. Retain the castings for future rack

requirements. It is not necessary to remove the rear flange castings.

Figure 1-6. Two-post Flush-mount Configuration

2 Attach one rail to the front post flange with two user-supplied screws.

Refer to Figure 1-6, item 2.

3 Slide the plunger bracket forward against the vertical post and secure the

plunger bracket to the post flange with two user-supplied screws. Refer

to Figure 1-6, item 3.

Installation