Dell Force10 S60 Series Manual - Page 32

Browse online or download pdf Manual for Switch Dell Force10 S60 Series. Dell Force10 S60 Series 45 pages.
Also for Dell Force10 S60 Series: Quick Start Manual (29 pages)

Print Page

DC Power Requirements

Parameter

Nominal input voltage

Maximum power supply input current

Maximum system power input

IEEE Standards

The S60 complies with the following IEEE standards:

• 802.3ae 10 Gigabit Ethernet

• 802.3ab 1000Base-T

• 802.1p L2 Prioritization

• 802.1Q VLAN Tagging, Double VLAN Tagging (Q in Q), GVRP

• 802.1s Multiple Spanning Tree Protocol

• 802.1w Rapid Spanning Tree Protocol

• 802.3ad Link Aggregation with LACP

• 802.1D Bridging, GARP, GMRP

• 802.3x Flow Control

• 802.1ac Frame Extension for VLAN tagging

• 802.1x Port based Network Access Control

Agency Compliance

The S60 system is designed to comply with the following safety and agency requirements.

Network Equipment Building Systems (NEBS) Compliance

• Use shielded cables for ports 0 - 43. The shields must be grounded at both ends.

• You can only use reverse airflow configurations in a NEBS-compliant installation. Use only supported

Dell S60 AC power supply units, DC power supply units, and fans.

• You must fit the Power Supply Units (PSUs) and fan modules with the supported Dell S60 filter kits.

You must replace the fan filters on a regular basis.

• Use this equipment with an external second-level 6kV lightning Surge Protection Device (SPD) at the

AC input of the building.

• For the NEBS-compliant installation, in order to protect the AC PSUs from damage due to excessive

power line surges, AC power connections must use a SPD.

• In order to comply with the GR-1089 Lightning Criteria for Equipment Interfacing with AC Power

Ports, use an external SPD at the AC input of the router.

Specifications

–40 to – 60 VDC

3.6 A at -48 VDC

225 W

S60 Specifications