Dell Force10 S60 Series Handmatig - Pagina 32

Blader online of download pdf Handmatig voor {categorie_naam} Dell Force10 S60 Series. Dell Force10 S60 Series 45 pagina's.
Ook voor Dell Force10 S60 Series: Snelstarthandleiding (29 pagina's)

Pagina afdrukken
Dell Force10 S60 Series Handmatig

DC Power Requirements

Parameter
Nominal input voltage
Maximum power supply input current
Maximum system power input

IEEE Standards

The S60 complies with the following IEEE standards:
• 802.3ae 10 Gigabit Ethernet
• 802.3ab 1000Base-T
• 802.1p L2 Prioritization
• 802.1Q VLAN Tagging, Double VLAN Tagging (Q in Q), GVRP
• 802.1s Multiple Spanning Tree Protocol
• 802.1w Rapid Spanning Tree Protocol
• 802.3ad Link Aggregation with LACP
• 802.1D Bridging, GARP, GMRP
• 802.3x Flow Control
• 802.1ac Frame Extension for VLAN tagging
• 802.1x Port based Network Access Control

Agency Compliance

The S60 system is designed to comply with the following safety and agency requirements.

Network Equipment Building Systems (NEBS) Compliance

• Use shielded cables for ports 0 - 43. The shields must be grounded at both ends.
• You can only use reverse airflow configurations in a NEBS-compliant installation. Use only supported
Dell S60 AC power supply units, DC power supply units, and fans.
• You must fit the Power Supply Units (PSUs) and fan modules with the supported Dell S60 filter kits.
You must replace the fan filters on a regular basis.
• Use this equipment with an external second-level 6kV lightning Surge Protection Device (SPD) at the
AC input of the building.
• For the NEBS-compliant installation, in order to protect the AC PSUs from damage due to excessive
power line surges, AC power connections must use a SPD.
• In order to comply with the GR-1089 Lightning Criteria for Equipment Interfacing with AC Power
Ports, use an external SPD at the AC input of the router.
Specifications
–40 to – 60 VDC
3.6 A at -48 VDC
225 W
S60 Specifications
|
32