Dell Networking S4810 Configuration Manual - Page 13

Browse online or download pdf Configuration Manual for Switch Dell Networking S4810. Dell Networking S4810 17 pages. Open networking
Also for Dell Networking S4810: Specifications (2 pages), Installation Manual (42 pages), Configuration Manual (17 pages), Getting Started Manual (16 pages)

Print Page

3.6

Configure ETS values

FTOS#configure

FTOS(conf)#qos-policy-output iSCSI ets

FTOS(conf-qos-policy-out-ets)#bandwidth-percentage ##

FTOS(conf-qos-policy-out-ets)#exit

FTOS(conf)#qos-policy-output OTHER ets

FTOS(conf-qos-policy-out-ets)#bandwidth-percentage ##

FTOS(conf-qos-policy-out-ets)#exit

Note: The sum of the bandwidth-percentages must be equal to 100.

3.7

FTOS#configure

FTOS(conf)#dcb enable

FTOS(conf)#dcb stack-unit all pfc-buffering pfc-ports 56 pfc-queues 2

3.8

FTOS#reload

System configuration has been modified. Save? [yes/no]yes

Proceed with reload [confirm yes/no]yes

Note: The switch will reboot.

3.9

FTOS#copy run start

3.10

Repeat the commands from section 3 to configure DCB on additional switches.

SCG1000

Force10 S4810 Configuration Guide