Dell Networking S4810 Manuale di configurazione - Pagina 13
Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Dell Networking S4810. Dell Networking S4810 17. Open networking
Anche per Dell Networking S4810: Specifiche tecniche (2 pagine), Manuale di installazione (42 pagine), Manuale di configurazione (17 pagine), Manuale introduttivo (16 pagine)
![Dell Networking S4810 Manuale di configurazione](/uploads/products/server2/3223908/3223908.png)
3.6
Configure ETS values
FTOS#configure
FTOS(conf)#qos-policy-output iSCSI ets
FTOS(conf-qos-policy-out-ets)#bandwidth-percentage ##
FTOS(conf-qos-policy-out-ets)#exit
FTOS(conf)#qos-policy-output OTHER ets
FTOS(conf-qos-policy-out-ets)#bandwidth-percentage ##
FTOS(conf-qos-policy-out-ets)#exit
Note: The sum of the bandwidth-percentages must be equal to 100.
3.7
Enable DCB
FTOS#configure
FTOS(conf)#dcb enable
FTOS(conf)#dcb stack-unit all pfc-buffering pfc-ports 56 pfc-queues 2
3.8
Reload
FTOS#reload
System configuration has been modified. Save? [yes/no]yes
Proceed with reload [confirm yes/no]yes
Note: The switch will reboot.
3.9
Save configuration
FTOS#copy run start
3.10
Configure additional switches
Repeat the commands from section 3 to configure DCB on additional switches.
13
SCG1000
Force10 S4810 Configuration Guide