Dell Networking S4810 Manuale di configurazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di configurazione per Interruttore Dell Networking S4810. Dell Networking S4810 17. Open networking
Anche per Dell Networking S4810: Specifiche tecniche (2 pagine), Manuale di installazione (42 pagine), Manuale di configurazione (17 pagine), Manuale introduttivo (16 pagine)

Introduction

This document illustrates how to configure Dell™ Force10™ S4810 switches for use with EqualLogic™ PS

Series storage using Dell best practices. The recommended configuration uses link aggregation groups

(LAGs) for inter-switch connections. Optional steps are provided in section 3 to enable Data Center

Bridging (DCB).

For more information on EqualLogic SAN design recommendations, see the EqualLogic Configuration

Guide at: www.delltechcenter.com/page/equallogic+configuration+guide.

1.1

This switch configuration guide describes an optimal configuration following Dell best practices for an

EqualLogic iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.2

The table below provides an overview of the switch configuration.

Table 1

Switch vendor

Switch model

Switch firmware

The latest firmware updates and documentation can be found at: www.force10networks.com. This site

requires a login.

SCG1000

Force10 S4810 Configuration Guide

Switch specifications

Dell Force10

S4810

8.3.12.0 or later

Dell Force10 S4810