Dell Networking S4810 구성 매뉴얼 - 페이지 5

{카테고리_이름} Dell Networking S4810에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Networking S4810 17 페이지. Open networking
Dell Networking S4810에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 매뉴얼 (42 페이지), 구성 매뉴얼 (17 페이지), 시작하기 매뉴얼 (16 페이지)

Dell Networking S4810 구성 매뉴얼
1

Introduction

This document illustrates how to configure Dell™ Force10™ S4810 switches for use with EqualLogic™ PS
Series storage using Dell best practices. The recommended configuration uses link aggregation groups
(LAGs) for inter-switch connections. Optional steps are provided in section 3 to enable Data Center
Bridging (DCB).
For more information on EqualLogic SAN design recommendations, see the EqualLogic Configuration
Guide at: www.delltechcenter.com/page/equallogic+configuration+guide.
1.1

Audience

This switch configuration guide describes an optimal configuration following Dell best practices for an
EqualLogic iSCSI SAN and is intended for storage or network administrators and deployment personnel.
1.2

Switch details

The table below provides an overview of the switch configuration.
Table 1
Switch vendor
Switch model
Switch firmware
The latest firmware updates and documentation can be found at: www.force10networks.com. This site
requires a login.
5
SCG1000
Force10 S4810 Configuration Guide
Switch specifications
Dell Force10
S4810
8.3.12.0 or later
Dell Force10 S4810