Dell Networking S4810 Configuratiehandleiding - Pagina 5

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Dell Networking S4810. Dell Networking S4810 17 pagina's. Open networking
Ook voor Dell Networking S4810: Specificaties (2 pagina's), Installatiehandleiding (42 pagina's), Configuratiehandleiding (17 pagina's), Aan de slag handleiding (16 pagina's)

Dell Networking S4810 Configuratiehandleiding
1

Introduction

This document illustrates how to configure Dell™ Force10™ S4810 switches for use with EqualLogic™ PS
Series storage using Dell best practices. The recommended configuration uses link aggregation groups
(LAGs) for inter-switch connections. Optional steps are provided in section 3 to enable Data Center
Bridging (DCB).
For more information on EqualLogic SAN design recommendations, see the EqualLogic Configuration
Guide at: www.delltechcenter.com/page/equallogic+configuration+guide.
1.1

Audience

This switch configuration guide describes an optimal configuration following Dell best practices for an
EqualLogic iSCSI SAN and is intended for storage or network administrators and deployment personnel.
1.2

Switch details

The table below provides an overview of the switch configuration.
Table 1
Switch vendor
Switch model
Switch firmware
The latest firmware updates and documentation can be found at: www.force10networks.com. This site
requires a login.
5
SCG1000
Force10 S4810 Configuration Guide
Switch specifications
Dell Force10
S4810
8.3.12.0 or later
Dell Force10 S4810