Earthlite UV Hot Towel Cabinet Large User Manual - Page 7
Browse online or download pdf User Manual for Food Warmer Earthlite UV Hot Towel Cabinet Large. Earthlite UV Hot Towel Cabinet Large 12 pages. Uv hot towel cabinet
Print PagePower Switch & Indicator Light
UV Lamp Switch
UV Hot Towel Cabinet Operation
1.
Plug in the hot towel cabinet
2.
Press the power switch to the ON position (indicator light will light up)
NOTE: The Large size unit has 2 power switches and 2 indicator lights, one for each compartment
3.
Ensure the door is closed securely to heat quickly and maintain temperature
4.
If desired, press the UV lamp switch to the ON position
NOTE: The UV lamp temporarily turns off when the door is opened
5.
When done using the hot towel cabinet, turn the power switch and UV lamp to the OFF position
6.
Remove any remaining towels
7.
Clean the hot towel cabinet according to the instructions on page 6
NOTE - INITIAL HOT TOWEL CABINET OPERATION
You may notice an odor from the hot towel cabinet the first few times it is used. This is normal and will
lessen with use. To speed up the process, we recommend initially turning on the empty unit for several
hours before filling with hot towels for the first time.
Operating Guidelines
•
For best results, pre-moisten towels with hot water.
•
Recommend preheating the empty hot towel cabinet for 20 minutes before placing towels.
•
Warming times vary depending on the starting temperature of the towels, how wet the towels
are, and the temperature of the room.
•
Do not overfill the heating chamber.
•
Always ensure the door(s) are closed securely when placing or taking out towels.
•
Use caution when opening the cabinet door - hot steam may escape.
SECTION 3 : OPERATING INSTRUCTIONS
Indicator
Light
Power
Switch
Located on the rear right-hand
side of the cabinet
5