Dell poweredge VRTX Getting Started Manual - Page 15

Browse online or download pdf Getting Started Manual for Switch Dell poweredge VRTX. Dell poweredge VRTX 30 pages. Server
Also for Dell poweredge VRTX: User Manual (35 pages), Release Note (5 pages), Getting Started Manual (14 pages), Quick Start & Reference Manual (2 pages), Technical Manual (45 pages), Getting Started (2 pages)

Print Page

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Button

all

Accessing the Device Through the CLI

You can manage the device using CLI commands, through the CMC to the

terminal console, or via a Telnet connection.

Through CMC

Insert the device into the chassis and enter the CLI commands upon

receiving a prompt.

Telnet Connection

Telnet is a terminal emulation TCP/IP protocol. RS-232 terminals can be

virtually connected to the local device through a TCP/IP protocol network.

Telnet is an alternative to a local login terminal, where a remote login is

required.

The device supports up to four simultaneous Telnet sessions. All CLI

commands can be used over a Telnet session.

If access is via a Telnet connection, ensure that the device has an IP address

and that software has been downloaded to the device.

To start a Telnet session:

1 Select Start > Run.

The Run window opens.

2 Type cmd.

The cmd window opens.

3 In the cmd window, type Telnet <IP address> <Enter>.

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY

Plasma\GSG\Plasma_UGUsing_CLI.fm

Description

When a parameter is required to define a range of ports or

parameters and all is an option, the default for the command

is all when no parameters are defined. For example, the

command interface range port-channel has the option of

either entering a range of channels, or selecting all. When the

command is entered without a parameter, it automatically

defaults to all.

Using the CLI