Dell poweredge VRTX Руководство по началу работы - Страница 15

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Dell poweredge VRTX. Dell poweredge VRTX 30 страниц. Server
Также для Dell poweredge VRTX: Руководство пользователя (35 страниц), Примечание к выпуску (5 страниц), Руководство по началу работы (14 страниц), Руководство по быстрому запуску и справочное руководство (2 страниц), Техническое руководство (45 страниц), Начало работы (2 страниц)

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell

Button

all

Accessing the Device Through the CLI

You can manage the device using CLI commands, through the CMC to the

terminal console, or via a Telnet connection.

Through CMC

Insert the device into the chassis and enter the CLI commands upon

receiving a prompt.

Telnet Connection

Telnet is a terminal emulation TCP/IP protocol. RS-232 terminals can be

virtually connected to the local device through a TCP/IP protocol network.

Telnet is an alternative to a local login terminal, where a remote login is

required.

The device supports up to four simultaneous Telnet sessions. All CLI

commands can be used over a Telnet session.

If access is via a Telnet connection, ensure that the device has an IP address

and that software has been downloaded to the device.

To start a Telnet session:

1 Select Start > Run.

The Run window opens.

2 Type cmd.

The cmd window opens.

3 In the cmd window, type Telnet <IP address> <Enter>.

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY

Plasma\GSG\Plasma_UGUsing_CLI.fm

Description

When a parameter is required to define a range of ports or

parameters and all is an option, the default for the command

is all when no parameters are defined. For example, the

command interface range port-channel has the option of

either entering a range of channels, or selecting all. When the

command is entered without a parameter, it automatically

defaults to all.

Using the CLI