Dell S5048F-ON Firmware Update - Page 3

Browse online or download pdf Firmware Update for Switch Dell S5048F-ON. Dell S5048F-ON 19 pages.
Also for Dell S5048F-ON: Setup Manual (29 pages)

Print Page

New and changed features

Functional area

BIOS

ONIE FW Updater

Important information

The following is important information you need to know when working with your switch:

BIOS

Only BIOS upgrade is supported. BIOS downgrade to a previous version is not supported.

USB-B driver

The S5048F-ON switch uses the Silicon Labs CP2109 USB-B chip. To find the correct USB-B universal asynchronous receiver-

transmitter (UART) driver, see https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers.

ONIE firmware image

Using the onie-firmware-x86_64-VENDOR_MACHINE-r0.bin image only updates the ONIE firmware components, such

as BIOS and CPLD. This image does not update the base ONIE version.

DIAG-OS installation or ONIE self-update

WARNING:

Do not power-cycle the board when a DIAG-OS installation or ONIE self-update is in progress. If the install

or upgrade task is interrupted, the board might have an invalid MBR/GPT/Grub, and would not boot into the OS or

ONIE. In this case, use a recovery procedure to bring up the switch so long as the BIOS is functional.

Solid state drive specifications

Table 4. SSD reliability

Transaction type

Reads

Writes

Feature description

● Updated to version 3.38.0.1-6

● Updated to AMI label 39

● Made inclusive language changes

● Updated the latest microcode to M01406D812D

● Updated the RTC/CMOS reg/values as follows:

● Updated to version 3.38.5.1-5 which updated the BIOS

Specification

—

TBW per JEDEC 218

TBW per JEDEC 219A

○ Reboot count: reg 0x58 bits 4-7

○ TCO reboot indication: reg 0x59 bit 0

Limits

unlimited

32.0

5.3