Dell S5048F-ON Обновление прошивки - Страница 3
Просмотреть онлайн или скачать pdf Обновление прошивки для Переключатель Dell S5048F-ON. Dell S5048F-ON 19 страниц.
Также для Dell S5048F-ON: Руководство по настройке (29 страниц)
New and changed features
Functional area
BIOS
ONIE FW Updater
Important information
The following is important information you need to know when working with your switch:
BIOS
Only BIOS upgrade is supported. BIOS downgrade to a previous version is not supported.
USB-B driver
The S5048F-ON switch uses the Silicon Labs CP2109 USB-B chip. To find the correct USB-B universal asynchronous receiver-
transmitter (UART) driver, see https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers.
ONIE firmware image
Using the onie-firmware-x86_64-VENDOR_MACHINE-r0.bin image only updates the ONIE firmware components, such
as BIOS and CPLD. This image does not update the base ONIE version.
DIAG-OS installation or ONIE self-update
WARNING:
Do not power-cycle the board when a DIAG-OS installation or ONIE self-update is in progress. If the install
or upgrade task is interrupted, the board might have an invalid MBR/GPT/Grub, and would not boot into the OS or
ONIE. In this case, use a recovery procedure to bring up the switch so long as the BIOS is functional.
Solid state drive specifications
Table 4. SSD reliability
Transaction type
Reads
Writes
Feature description
● Updated to version 3.38.0.1-6
● Updated to AMI label 39
● Made inclusive language changes
● Updated the latest microcode to M01406D812D
● Updated the RTC/CMOS reg/values as follows:
● Updated to version 3.38.5.1-5 which updated the BIOS
Specification
—
TBW per JEDEC 218
TBW per JEDEC 219A
○ Reboot count: reg 0x58 bits 4-7
○ TCO reboot indication: reg 0x59 bit 0
Limits
unlimited
32.0
5.3
3