Award CS1-903S Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Ventilation Hood Award CS1-903S. Award CS1-903S 15 pages.

Print Page

TROUBLESHOOTING

Fault

Light on, but motor

does not work

Light does not

work, motor does

not work

Oil leakage

Lights not working

Insufficient suction

The Range hood

inclines

NOTE:

Any electrical repairs to this range hood must conform to your local, laws.

Please contact the service center if in any doubt before undertaking any of the

above. Always disconnect the unit from the power source when opening the unit.

MAINTENANCE AND CLEANING

Caution:

• Before maintenance or cleaning is carried out, the

range hood should be disconnected from the mains

power supply. Ensure that the range hood is switched

off at the wall socket and the plug removed.

• External surfaces are susceptible to scratches and abrasions, so please follow the

cleaning instructions to ensure the best possible result is achieved without damage.

GENERAL

Cleaning and maintenance should be carried out when appliances are cold especially

when cleaning. Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on

the surfaces.

Possible Cause

Fan switch turned off

Fan switch failed

Motor failed

House fuses blown

Mains power cable is loose or

disconnected

One way valve (if fitted) and the

outlet are not tightly sealed

Leakage from the connection of

chimney and cover

Broken or faulty bulbs

The distance between the

range hood and the cook top is

too far

The fixing screw is not tight

enough

Select a fan switch position.

Contact service center.

Reset/Replace fuses.

Refit mains power cable to

power outlet.

Switch power outlet on.

Take down the one way valve

and seal with sealant.

Take chimney down and seal.

Replace blubs as per this

instruction.

Refit the range hood to the

correct distance.

Tighten the hanging screw and

make sure it is level.

Solution