Award CS1-903S Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентиляційна витяжка Award CS1-903S. Award CS1-903S 15 сторінок.
Друкувати сторінку
TROUBLESHOOTING
Fault
Light on, but motor
does not work
Light does not
work, motor does
not work
Oil leakage
Lights not working
Insufficient suction
The Range hood
inclines
NOTE:
Any electrical repairs to this range hood must conform to your local, laws.
Please contact the service center if in any doubt before undertaking any of the
above. Always disconnect the unit from the power source when opening the unit.
MAINTENANCE AND CLEANING
Caution:
• Before maintenance or cleaning is carried out, the
range hood should be disconnected from the mains
power supply. Ensure that the range hood is switched
off at the wall socket and the plug removed.
• External surfaces are susceptible to scratches and abrasions, so please follow the
cleaning instructions to ensure the best possible result is achieved without damage.
GENERAL
Cleaning and maintenance should be carried out when appliances are cold especially
when cleaning. Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on
the surfaces.
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Mains power cable is loose or
disconnected
One way valve (if fitted) and the
outlet are not tightly sealed
Leakage from the connection of
chimney and cover
Broken or faulty bulbs
The distance between the
range hood and the cook top is
too far
The fixing screw is not tight
enough
Select a fan switch position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit mains power cable to
power outlet.
Switch power outlet on.
Take down the one way valve
and seal with sealant.
Take chimney down and seal.
Replace blubs as per this
instruction.
Refit the range hood to the
correct distance.
Tighten the hanging screw and
make sure it is level.
9
Solution