Miele DA 409 Operating And Installation Instructions - Page 33

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 409. Miele DA 409 36 pages. Ventilation system
Also for Miele DA 409: Operating And Installation Instructions (36 pages), Installation Instructions (1 pages), Product Dimensions (2 pages), Operating And Installation Manual (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 409 Operating And Installation Instructions
Air extraction
_WARNING
Danger of toxic fumes.
Gas cooking
appliances
release
carbon monoxide
that can be
harmful or fatat if inhaled.
The exhaust
gases extracted
by
the hood shoutd be vented
outside of the buitding
onty.
Do not terminate
the exhaust
ducts in attics, garages,
crawispaces,
etc.
To reduce the risk of fire, only use
metal ductwork.
Please read and follow the
"IMPORTANT SAFETY
INSTRUCTIONS"
to reduce the risk of
personal injury. Follow all local building
codes when installing the hood.
Exhaust ducting
and connections
- The ducting should be as short and
straight as possible, and the number
of sharp bends should be minimized.
- For efficient air extraction, the
diameter of the ductwork should not
be less than 6" (150 ram). Use of flat
ducts also reduces the air extraction
efficiency.
- Noise levels of the hood will increase
if flat ducts or round ducts of less
than 6" (!50 ram) in diameter are
used.
- Use smooth or flexible pipes made
from approved
non-flammable
materials for exhaust ducting.
- Where the ductwork is horizontal, it
must slope away from the hood at
least 1/,, per foot (! cm per meter) to
J8
prevent condensation
from dripping
into the appliance.
- If the exhaust is ducted through an
outside wall, a Miele Telescopic Wall
Vent can be used.
33