Miele DA 449-4 EXT Operating And Installation Manual - Page 18

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Miele DA 449-4 EXT. Miele DA 449-4 EXT 40 pages. Cooker

Print Page

Before any cleaning or maintenance

work is carried out, disconnect the

cooker hood from the mains supply.

Ensure that:

– it is switched off at the wall

socket and the plug removed, or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed

(in countries where this is

applicable).

^ A microfibre E-Cloth is available from

the Miele UK Spare Parts

Department, which is suitable for

cleaning surfaces such as stainless

steel, glass, plastic and chrome

without the use of chemicals. It can

be washed 300 times.

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using a Miele E-Cloth, or

with warm water and a little

washing-up liquid applied with a well

wrung-out soft sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use any of the following to clean

any surfaces:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners and cream

cleaners.

– abrasive sponges, e.g. pot scourers,

or sponges which have been

previously used with abrasive

cleaning agents.

Please note the following advice for

cleaning different surfaces.

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-Cloth, or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a

conditioning agent for stainless steel

such as Neoblank (available from the

Miele UK Spare Parts Department) can

also be used.

Follow the manufacturer's instructions

and apply sparingly with an even

pressure following the direction of the

grain.