Miele DA 449-4 EXT Посібник з експлуатації та встановлення - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Вентиляційна витяжка Miele DA 449-4 EXT. Miele DA 449-4 EXT 40 сторінок. Cooker

Before any cleaning or maintenance
work is carried out, disconnect the
cooker hood from the mains supply.
Ensure that:
– it is switched off at the wall
socket and the plug removed, or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed
(in countries where this is
applicable).
^ A microfibre E-Cloth is available from
the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals. It can
be washed 300 times.
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using a Miele E-Cloth, or
with warm water and a little
washing-up liquid applied with a well
wrung-out soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
18
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Do not use any of the following to clean
any surfaces:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners.
– abrasive sponges, e.g. pot scourers,
or sponges which have been
previously used with abrasive
cleaning agents.
Please note the following advice for
cleaning different surfaces.
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
using the Miele E-Cloth, or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
To help prevent re-soiling, a
conditioning agent for stainless steel
such as Neoblank (available from the
Miele UK Spare Parts Department) can
also be used.
Follow the manufacturer's instructions
and apply sparingly with an even
pressure following the direction of the
grain.