Miele DDG 102 Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Ventilation Hood Miele DDG 102. Miele DDG 102 28 pages. External motor roof installation
Also for Miele DDG 102: Operating And Installation Manual (24 pages), Operating And Installation Instructions (28 pages), Installation Instructions Manual (28 pages)
Print Page
For safety reasons, the external motor may only be used when it
has been fully installed.
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
Any contact with live connections or tampering with the electrical
or mechanical components of the external motor will endanger your
safety and may lead to appliance malfunctions.
Only open the housing as described in the installation instructions
and in the "Cleaning and care" section of this booklet. Under no
circumstances should any other parts of the housing be opened.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
If the mains connection cable is damaged, it must only be
replaced by a Miele authorised service technician or suitably
qualified electrician in order to avoid a hazard.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
– the mains circuit breaker is switched off, or
– the screw-out fuse is removed (in countries where this is
applicable), or
– the plug is withdrawn from the socket. Do not pull on the cable,
but pull the plug to do this.
Warning and Safety instructions
5