Miele PUR 68 W Operating And Installation Instructions - Page 30

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele PUR 68 W. Miele PUR 68 W 40 pages. Ventilation system
Also for Miele PUR 68 W: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (40 pages)

Print Page
Miele PUR 68 W Operating And Installation Instructions
Installation

Installation recommendations

– When deciding on the safety distance
between the hob and cooker hood,
please note that a distance of 650
mm above electric cookers/hobs may
be preferable to give more working
space under the hood.
– Account should also be taken of the
height of the person who will be us-
ing the hood most often. They should
have sufficient space to work com-
fortably at the hob, and be able to
reach the hood controls with ease.
– Please be aware that if positioned too
high, extraction will be inefficient.
– To achieve optimum vapour extrac-
tion, the cooker hood must cover the
hob. It should be positioned centrally
over the hob, not to the side of it.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to dis-
mantle in the event that service is re-
quired. This should be taken into
consideration when planning the pos-
ition of cupboards, shelves, ceilings
or features in the vicinity of the
cooker hood.
30
Drilling diagram for wall
mounting
 Please follow the directions given in
the installation instructions supplied
for drilling.
 For pre-installation of a back wall
where the holes have to be pre-
drilled, please refer to the drilling dis-
tances in the drawing above (screws
 5 mm).
*The dimension for the middle wall
bracket is variable. It will depend on the
position of the wall vent and the socket.
It should be set as low as possible.