Miele PUR 68 W Инструкции по эксплуатации и установке - Страница 30

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка Miele PUR 68 W. Miele PUR 68 W 40 страниц. Ventilation system
Также для Miele PUR 68 W: Инструкции по эксплуатации и установке (40 страниц), Инструкции по эксплуатации и установке (40 страниц), Инструкции по эксплуатации и установке (40 страниц), Инструкции по эксплуатации и установке (36 страниц), Инструкции по эксплуатации и установке (40 страниц)

Печатать страницу
Miele PUR 68 W Инструкции по эксплуатации и установке
Installation

Installation recommendations

– When deciding on the safety distance
between the hob and cooker hood,
please note that a distance of 650
mm above electric cookers/hobs may
be preferable to give more working
space under the hood.
– Account should also be taken of the
height of the person who will be us-
ing the hood most often. They should
have sufficient space to work com-
fortably at the hob, and be able to
reach the hood controls with ease.
– Please be aware that if positioned too
high, extraction will be inefficient.
– To achieve optimum vapour extrac-
tion, the cooker hood must cover the
hob. It should be positioned centrally
over the hob, not to the side of it.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to dis-
mantle in the event that service is re-
quired. This should be taken into
consideration when planning the pos-
ition of cupboards, shelves, ceilings
or features in the vicinity of the
cooker hood.
30
Drilling diagram for wall
mounting
 Please follow the directions given in
the installation instructions supplied
for drilling.
 For pre-installation of a back wall
where the holes have to be pre-
drilled, please refer to the drilling dis-
tances in the drawing above (screws
 5 mm).
*The dimension for the middle wall
bracket is variable. It will depend on the
position of the wall vent and the socket.
It should be set as low as possible.