HP 3000 Series Installation Manual - Page 33

Browse online or download pdf Installation Manual for Desktop HP 3000 Series. HP 3000 Series 42 pages. 9x9 to k class conversion
Also for HP 3000 Series: Manual (25 pages), Upgrade Manual (19 pages), Manual (20 pages)

Print Page

Series 44/48 to 58 Memory Upgrade

CHANGING THE NAMEPLATE

This procedure describes replacing the Series 44/48 nameplate with a Series 58 nameplate. A flatblade screwdriver is

required for this procedure.

I; Use the key to unlock the front panel. Swing the panel open to the right.

2. Unscrew the two nuts on the top back of the nameplate.

3. From the back of the nameplate, use the flatblade screwdriver to pry the adhesive-backed nameplate from the panel.

4. Remove the old adhesive from the panel before installing the new nameplate.

5. Remove the protective backing from adhesive on the back side of the new nameplate.

6. Position the new nameplate so that the two small screws through the holes in the panel.

7. Reinstall the two nuts.

NOTE

Ensure that the RFI fingers on the front and back panels make complete contact with the RFI brackets around the

card cage. See Figure 2-5

RFI Brackets

Figure 2-5. Series 58 - Back View (RFI Brackets)

8. Secure with the key.

2-13