Miele Dynamic U1 HS08 Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for Vacuum Cleaner Miele Dynamic U1 HS08. Miele Dynamic U1 HS08 32 pages.
Print Page
Selecting the suction power setting
You can adjust the suction power to suit
your preference.
Rotary selector (see fig. 15)
^ Turn the suction power selector to the
desired setting.
PremiumLine Models (see fig. 16)
"Automatic" button
+/- controls, to set the desired
suction power setting
§ "Thermo" indicator
Blockage protection indicator
Service indicator (reset button)
"Carpet" indicator, the Powerbrush
was turned on using the Carpet/Floor
button on the hand piece.
+/- Controls (see fig. 17)
The symbols on the control panel
indicate what each setting is
recommended for:
curtains, lightweight fabrics
upholstery, cushions
thick pile carpets, rugs and
runners
energy saving, daily vacuuming
with low noise level
low pile carpets
hard flooring and intensive
cleaning of carpets.
^ To select a higher power setting,
press the + button.
^ To select a lower power setting,
press the - button.
The selected power level is displayed
with a yellow light.
"Automatic" setting (see fig. 18)
(models with +/- controls)
If the "Automatic" setting is selected,
the vacuum cleaner will automatically
adjust the suction power level to suit
the surface being cleaned.
^ Press the "Automatic" button.
The button lights yellow.
To deactivate the setting, press the
"Automatic" button again.
,
Do not use the this setting to
vacuum draperies or other
lightweight fabrics. Excessive
suction may cause damage.
Note (see fig. 19):
To adjust to changing floor heights,
e.g. carpet edges, thresholds, etc.,
briefly step on the release button to
raise the front of the vacuum cleaner.
en
11