Miele Dynamic U1 HS08 Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Vacuum Cleaner Miele Dynamic U1 HS08. Miele Dynamic U1 HS08 32 pages.
Print Page
,
Do not use the Powerbrush on
floors with a variable or uneven
surface. The brush could come in
contact with the floor and cause
damage.
Turning the Powerbrush On/Off
(see fig. 24)
The beater bar in the Powerbrush is
driven by a separate motor, which can
be switched on and off.
^ Press the "Carpet/Floor" button on the
handle.
The Powerbrush turns on. The indicator
on the control panel lights yellow.
You can also use the button to switch
off the Powerbrush while vacuuming,
for example when moving from carpet
to hard floors.
The Powerbrush automatically shuts
off anytime the body of the vacuum
cleaner is placed into the full upright
position.
^ For best results, move the
Powerbrush slowly back and forth
over the area you wish to clean.
Maintenance and care
,
Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
The Miele filter system consists of the
following three components.
– FilterBag
– Exhaust filter
– Dust compartment filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner's efficiency.
Only use Miele FilterBags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
,
The use of FilterBags made of
paper or a similar material, or
FilterBags with a cardboard
retaining plate can lead to serious
damage to the vacuum cleaner and
possibly voiding the warranty, just
as with the use of filter bags without
the "Original Miele" logo.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can
be purchased from an authorized Miele
vacuum dealer or by visiting the Miele
store at http://store.miele.com.
en
13