Miele K 12820 SD edt Operating And Installation Instructions - Page 34

Browse online or download pdf Operating And Installation Instructions for Refrigerator Miele K 12820 SD edt. Miele K 12820 SD edt 44 pages. Refrigerator with dynamiccooling
Also for Miele K 12820 SD edt: Operating And Installation Manual (48 pages), Operating And Installation Manual (40 pages), Operating And Installation Instructions (44 pages), Operating And Installation Instructions (48 pages)

Print Page
Miele K 12820 SD edt Operating And Installation Instructions

Changing the door hinging

The appliance is supplied with
right-hand door hinging. If left-hand
door hinging is required, the hinging
must be changed.
To change the door hinging, you will
need the following tools:
– a Phillips head screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed to change
the door hinging.
Removing the door handle
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate
(see arrow).
^ Undo the 4 (Torx 15) screws in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
34