Miele K 12820 SD edt Bedienings- en installatie-instructies - Pagina 34

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele K 12820 SD edt. Miele K 12820 SD edt 44 pagina's. Refrigerator with dynamiccooling
Ook voor Miele K 12820 SD edt: Bedienings- en installatiehandleiding (48 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (48 pagina's)

Changing the door hinging

The appliance is supplied with

right-hand door hinging. If left-hand

door hinging is required, the hinging

must be changed.

To change the door hinging, you will

need the following tools:

– a Phillips head screwdriver,

– a flat-bladed screwdriver,

– a selection of Torx screwdrivers,

– a spanner.

Two people are needed to change

the door hinging.

Removing the door handle

^ Pull door handle a towards you. Side

section b slides back.

^ Pull side section b firmly back out of

the guides on the mounting plate

(see arrow).

^ Undo the 4 (Torx 15) screws in the

mounting plate, and remove the

handle.

^ Remove the cover caps from the

opposite side, and fit them into the

empty holes.