ALLO BOSS 1.2 Manual - Page 3

Browse online or download pdf Manual for Turntable ALLO BOSS 1.2. ALLO BOSS 1.2 3 pages.

Print Page
ALLO BOSS 1.2 Manual
Before powering on the unit please read the following
The BOSS v1.2 power jumper in your player is ON.
* the BOSS with the DC to typeC USB adapter cable provided
* the RPI with the DC to microUSB adapter cable provided
If you want to feed power to both boards, please open your case and remove the jumper.
1. LEDs are on, means power is fed to both boards. If not, check power source.
2. RPI LED intermittent, mean OS booted properly. If static, try to power on again.
3. Ethernet LED intermittent, means its connected to network. If not, try to re-boot.
•
After 1-2 mins, the unit should be visible on your network.
•
You can access the user interface by accessing the IP or simply type: volumio.local or
dietpi.local
For more information, please visit ALLO.com / Plug & Play /
BOSS Player Support & Downloads at the bottom of the page
This means that you can feed power to:
DO NOT FEED POWER TO BOTH
BOSS 1.2 POWER JUMPER INSTRUCTIONS
Boot-Up Checklist