Burkert 1066 Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Controller Burkert 1066. Burkert 1066 6 pages. Control head

Print Page

FLUIDIC CONNECTION

Possible expansion steps

• 24 V DC, 24 V AC, 110 / 230 V UC without communication

• AS interface

• DeviceNet

• Inductive proximity switches or

• Mechanical limit switches (microswitches): only in

connection with UC without communication

Various pneumatically operated process valves can be

combined with the Control Head Type 1066 to suit different

conditions of use. Single-acting and double-acting valves are

suitable; a third position (an intermediate position on use of a

third initiator) can be moved to. Mounting on the process valve

is done with a suitable flange adapter (see Operating

Instructions for Type 1066).

Connection of the control air

Compressed

air

(G 1/4)

Valves V1, V2, V3

(plug connectors for hose 6/4 or 1/4")

Installation of the valve

• Assemble the process valve according to manufacturer's

instructions.

• For mounting the control head on the process valve, a valve-

specific flange adapter is required.

(see Operating Instructions for Type 1066)

• Installation of control head in any orientation but preferably

upright.

ELECTRICAL CONNECTION

Control heads without communication

Printed card for 24 V DC

Status indication of valves V1, V2 and V3 by LED

24 V DC version 1

Direct connection to 8-pole screw terminal on the printed card;

for this purpose, be sure to remove the control head cover.

Exhaust

air

(G 1/4)

24 V DC version 2

Connection via 8-pole circular connector to DIN 45326; the

internal connections to the screw terminal are already executed.

Control heads without communication

24 / 110 / 230 V UC

Connection via 2x6-pole screw terminals; each allocated to a

valve Type 6102; 2 mechanical micro limit switches; no LED

status display.

Printed card for 24 / 110 / 230 V UC

Adjustments during commissioning

To adjust the proximity switches or limit switches:

- remove control head

- adjust proximity

1 Valve 2

2 +24 DC for proximity switches

- replace cover

3 proximity switch 2

4 Valve 1

5 proximity switch 1

6 Valve 3

7 proximity switch 3

8 GND (common mass)

ELECTRICAL CONNECTION

switches via

setscrews

(for adjustment,

see Operating

Instructions)

Adjusting screws

(spindles) for

proximity switches

Turn clockwise:

proximity switch

moves upwards

Turn anticlockwise:

proximity switch

moves downwards