Dialogic IMG 1010 Quick Start Manual - Page 17

Browse online or download pdf Quick Start Manual for Gateway Dialogic IMG 1010. Dialogic IMG 1010 18 pages. Connecting dc power
Also for Dialogic IMG 1010: Install Instructions Manual (6 pages), Quick Start Manual (11 pages), Quick Start Manual (10 pages), Quick Start Manual (10 pages), Installation Instructions Manual (9 pages), Quick Start Manual (4 pages)

Print Page

Install GCEMS software.

To take advantage of all new features, it is recommended that the latest version of GCEMS

software be installed on the GCEMS Server. The most current software can be obtained from

the Dialogic Technical Support website.

1. Go to the Dialogic Support Technical Website at

2. Select 'Downloads'. You will require a logon username and password to access the

downloads site. (A support contract is needed to access this site.) Within this site will

be two software binary files with the following format. Download the latest version of

these files.

•

IMG_10.5.3.xxx.bin

•

IMGUserInterface_10.5.3.xxx.bin

Note: If you do not have a support contract with Dialogic, then the software supplied

to you on the Software CD can be used.

1. Open a terminal on the GCEMS server and become a root/superuser by entering the

command:

[localuser@localhost]$ su

Password: excel2

Change the mode to executable for the following files being installed. This is

accomplished by executing the following commands:

[root@localhost]#chmod +x IMG_10.5.3.xxx.bin

[root@localhost]#chmod +x IMGUserInterface_10.5.3.xxx.bin

3. Install GCEMS software.

[root@localhost]# ./IMG_10.5.3.xxx.bin (xxx=build)

The GCEMS will be installed in the directory/opt/dialogic/installs/IMG_10.5.3.xxx. At

the end of the installation you will be prompted to log out and then log back in. Do not

log out and back in at this time.

4. Install the IMG User Interface

[root@localhost]# ./IMGUserInterface_10.5.3.xxx.bin (xxx=build) (Follow prompts)

IMGUserInterface is installed into /opt/dialogic/installs/IMGUserInterface_10.5.3.xxx

directory.

5. At the end of the installation you will be prompted to log out. Log out as root user by

entering the exit command.

For more information on installing GCEMS and ClientView, refer to the IMG 1010 - Software

Installation and Setup > Installing GCEMS software topic in the online documentation

through the links above.

IMG 1010 Quick Start Guide

http://www.dialogic.com/support

(Follow prompts)