Miller XR-W AlumaPro Plus 25 ft Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Welding System Miller XR-W AlumaPro Plus 25 ft. Miller XR-W AlumaPro Plus 25 ft 36 pages. Ce and non-ce models air and water-cooled guns; 250 ampere (air) push-pull; 300 ampere (air) push-pull; 400 ampere (water) push-pull

Print Page
Miller XR-W AlumaPro Plus 25 ft Owner's Manual

5-3. 14-Pin Plug Information For Connecting Wire Feeder To Power Source

*The remaining pins are not used.

5-4. Opening Top Cover Of XR-AlumaPro Plus Gun

OM-245892 Page 10
Pin*
1
Motor 0 to +24 volts DC with respect to pin 2
2
Motor Common
3
+5 volts DC tachometer power
4
Tachometer ref
5
Tachometer signal
6
Trigger
7
Trigger
8
Wire speed ref. +5 volts DC
9
Wire speed com
10
Wire speed 0 to +5 volts DC with respect to pin 9
11
Gun sensing resistor with respect to pin 9
12
Not used.
13
Not used.
14
Not used.
1
Pin Information
1
Top Cover
Squeeze sides of cover and lift up
as shown.
To close cover, pivot cover closed
on gun, and push cover down until
cover locks tight.
Ref. 804 544-B