Miller XR-W AlumaPro Plus 25 ft Owner's Manual - Page 15
Browse online or download pdf Owner's Manual for Welding System Miller XR-W AlumaPro Plus 25 ft. Miller XR-W AlumaPro Plus 25 ft 36 pages. Ce and non-ce models air and water-cooled guns; 250 ampere (air) push-pull; 300 ampere (air) push-pull; 400 ampere (water) push-pull
Print Page
5-5. Threading Welding Wire Through Gun
Tools Needed:
For XR-AlumaPro Plus Gun:
!
Welding wire is electrically live when
gun trigger is used to jog wire.
.
Turn OFF coolant supply before threading wire
through gun.
Lay gun cable out straight. Press Jog switch until about 6
in. (152 mm) of wire is sticking out end of contact tip.
Cut off wire. Close and
latch wire feeder door.
Refer to wire feeder manual for instructions on
feeding wire through feeder.
.
Verify pressure adjustment
on handle matches the wire
type. See Section 6-2.
Ref. 804 544-B / 804 545-B
OM-245892 Page 11