Miller Maxstar 161 STL Owner's Manual - Page 31

Browse online or download pdf Owner's Manual for Welding Accessories Miller Maxstar 161 STL. Miller Maxstar 161 STL 44 pages. Arc welding power source with auto-line

Print Page

SECTION 7 − ADVANCED MENU FUNCTIONS

7-1. Accessing Tech Menu For Maxstar 161 Models

ARC/TCY

STUC

FACTORY RESET

SOFTWARE NUMBER

A complete Parts List is available at www.MillerWelds.com

TECH

OFF

Press and hold Menu button for ap-

proximately four seconds to scroll

past User Menu to Tech Menu. Use

Menu button to cycle through para-

meters that can be set.

Rotate Encoder to adjust paramet-

er setting.

To exit Tech Menu, press and hold

menu button approximately one

second, or turn power off.

[ARC/TCY] Arc Timer: Monitors hours, minutes, and cycles of

valid arc on. To view, rotate encoder. To reset, rotate encoder until

[RESET] [YES] is displayed. Press Menu button to display [RESET]

[Done]. Displays turn to [000] [000].

[STUC] > [OFF] Stick Stuck: Detects if the electrode is stuck or

shorted to the workpiece. Turns weld output off to aid in freeing the

electrode. To turn on, rotate encoder. Not recommended for large

diameter electrodes.

[FACTORY RESET] Machine Reset: Resets all machine values

back to factory defaults. To reset, turn encoder to [RESET] [YES].

Then press Menu button. [RESET] [DONE] will be displayed when

the reset is complete and factory defaults have been restored.

[SOFTWARE NUMBER] Software Number: Software number and

revision will be displayed.

Menu Button

Parameter Display

Encoder

Settings in the Tech Menu are

global, meaning they may per-

tain to all or some of the pro-

cess.

OM-275099 Page 27