Miller Maxstar 161 STL Owner's Manual - Page 29

Browse online or download pdf Owner's Manual for Welding Accessories Miller Maxstar 161 STL. Miller Maxstar 161 STL 44 pages. Arc welding power source with auto-line

Print Page

6-7. Accessing Control Panel Menu: Lift-Arc TIG (STH And STL Models Only)

USER

REMOTE STD

PPS

A complete Parts List is available at www.MillerWelds.com

Trigger Mode Selection:

[REMOTE STD] Remote Standard

Typically used with a remote foot or hand control. REMOTE STD requires

a maintained contact closure to enable weld output. Amperage can be con-

trolled with a remote potentiometer, or it can be set at the control panel.

[OUTPUT ON] Output on (Lift only)

[PPS] Pulse Control: (STH Model Only)

Reduces heat input to minimize distortion and increase travel speed. Set

PPS (pulse per second). The range is OFF−150 PPS. Background Am-

perage and Peak Amperage are not adjustable. Background Amperage

OFF

equals 25% of Peak Amperage. Peak Amperage Time equals 40%.

While in the Lift-Arc process, press

and hold Menu button for approxim-

ately two seconds to access Ma-

chine Configuration menus. Use

Menu button to cycle through pa-

rameters that can be set.

Rotate Encoder to adjust parame-

ter setting.

Menu Button

Parameter Display

Encoder

OM-275099 Page 25