Miller Maxstar 161 STL Benutzerhandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 STL herunter. Miller Maxstar 161 STL 44 Seiten. Arc welding power source with auto-line

Miller Maxstar 161 STL Benutzerhandbuch

6-7. Accessing Control Panel Menu: Lift-Arc TIG (STH And STL Models Only)

1
USER
REMOTE STD
PPS
.
A complete Parts List is available at www.MillerWelds.com
2
Trigger Mode Selection:
[REMOTE STD] Remote Standard
Typically used with a remote foot or hand control. REMOTE STD requires
a maintained contact closure to enable weld output. Amperage can be con-
trolled with a remote potentiometer, or it can be set at the control panel.
[OUTPUT ON] Output on (Lift only)
[PPS] Pulse Control: (STH Model Only)
Reduces heat input to minimize distortion and increase travel speed. Set
PPS (pulse per second). The range is OFF−150 PPS. Background Am-
perage and Peak Amperage are not adjustable. Background Amperage
OFF
equals 25% of Peak Amperage. Peak Amperage Time equals 40%.
1
While in the Lift-Arc process, press
and hold Menu button for approxim-
ately two seconds to access Ma-
chine Configuration menus. Use
Menu button to cycle through pa-
rameters that can be set.
2
3
Rotate Encoder to adjust parame-
ter setting.
3
Menu Button
Parameter Display
Encoder
OM-275099 Page 25