Miller Maxstar 161 STL Benutzerhandbuch - Seite 27

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 STL herunter. Miller Maxstar 161 STL 44 Seiten. Arc welding power source with auto-line

Seite drucken
Miller Maxstar 161 STL Benutzerhandbuch

6-3. Process Selection (STH Model Only)

=Light Off
=Light On
2
3
1
Press
Press

6-4. Process Selection (S Model Only)

2
1
.
A complete Parts List is available at www.MillerWelds.com
4
Press
=Light Off
=Light On
3
1
Press
Press
5
Press
1
Process Selector Button
Use control to select required welding
process. Press Button until LED for
desired process is illuminated.
2
Stick (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are en-
ergized.
3
Stick 6010 (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are en-
ergized. Parameters are optimized to
run a 6010 Stick electrode.
1
Process Selector Button
Use control to select required
welding process. Press Button un-
til light (LED) for desired process is
illuminated.
2
TIG Impulse Start
When selected, an impulse HF arc
starting method is activated (see
Section 6-5).
3
Lift-Arc Start
When selected, a TIG arc starting
method in which the electrode
must come in contact with the
workpiece to initiate an arc is acti-
vated (see Section 6-5).
4
Stick (SMAW)
When selected, Adaptive Hot
Start, Stick Stuck and DIG circuitry
are energized.
5
Stick 6010 (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are
energized. Parameters are opti-
mized to run a 6010 Stick elec-
trode.
OM-275099 Page 23