Miller SUITCASE 12RC Owner's Manual - Page 23
Browse online or download pdf Owner's Manual for Welding Accessories Miller SUITCASE 12RC. Miller SUITCASE 12RC 40 pages. Wire feeder with gun and meters
Also for Miller SUITCASE 12RC: Specifications (2 pages), Owner's Manual (36 pages), Owner's Manual (40 pages)
Print Page
6-2. Setting Digital Meter Board PC4 DIP Switches
Wire Speed
Settings
Wire Speed In
Inches Per Minute
Wire Speed In
Meters Per Minute
1
2
3
.
Meter DIP switches are factory set
to display voltage using 14-pin
feedback. Meter hold feature is
factory set to off position.
Shows switch in ON/DOWN (closed) position.
Shows switch in OFF/UP (open) position.
Shows switch does not affect this function.
Voltage Display
Settings
Display Volts
Using Sense Lead
Display Volts
Using 14-Pin
1
Front Meter Panel
2
S1 DIP Switch
3
S2 DIP Switch
If the DIP switches are set to a Meter
Hold (ON) position, the meter value
will hold 5 seconds after gun is trig-
gered. The meter value will continue
to hold for 8 seconds after trigger is
released or until gun is re-triggered.
Amperage Display
Settings
Display Amps Using
Current Sensor
Display Amps
Using 14-Pin
Meter Hold
Settings
Meter Hold ON
Meter Hold OFF
Ref. 803 141
OM-263984 Page 19