Miller arrow 25 Operator's Manual - Page 10
Browse online or download pdf Operator's Manual for Camera Accessories Miller arrow 25. Miller arrow 25 13 pages. Fluid head
Print Page
Maintenance
The Arrow 25 Fluid Head offers high quality surface coatings,
dust and moisture seals. Miller recommends keeping the
Fluid Head clean at all times by using soft brushes and lint
free cloth to wipe over the surfaces.
Do not immerse the Fluid Head in any liquid.
◗
Do not use stiff brushes, abrasives, harsh detergents and
◗
solvents.
Battery Replacement
The Arrow 25 Fluid Head uses a single GP23A type - 12 Volt
battery for Illumination. Miller recommends the following
batteries to provide long life performance – Duracell MN21/23,
Eveready A23 or Vinnic L1028.
Using a Phillips Head #1 screw driver, remove the two
◗
RETAINING SCREWs, BATTERY DOOR and the old battery.
Insert the new battery as shown in figure 7.
◗
Insert the tab on the BATTERY DOOR into the body first then
◗
align the two screw holes and tighten the screws snugly.
Illumination Button
Fig. 8
Battery
9
Retaining Screw
Battery Door