Miller arrow 25 Operatör El Kitabı - Sayfa 10

Kamera Aksesuarları Miller arrow 25 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Miller arrow 25 13 sayfaları. Fluid head

Maintenance

The Arrow 25 Fluid Head offers high quality surface coatings,

dust and moisture seals. Miller recommends keeping the

Fluid Head clean at all times by using soft brushes and lint

free cloth to wipe over the surfaces.

Do not immerse the Fluid Head in any liquid.

◗

Do not use stiff brushes, abrasives, harsh detergents and

◗

solvents.

The Arrow 25 Fluid Head uses a single GP23A type - 12 Volt

battery for Illumination. Miller recommends the following

batteries to provide long life performance – Duracell MN21/23,

Eveready A23 or Vinnic L1028.

Using a Phillips Head #1 screw driver, remove the two

◗

RETAINING SCREWs, BATTERY DOOR and the old battery.

Insert the new battery as shown in ﬁgure 7.

◗

Insert the tab on the BATTERY DOOR into the body ﬁrst then

◗

align the two screw holes and tighten the screws snugly.

Illumination Button

Fig. 8

Battery

Retaining Screw

Battery Door