3B SCIENTIFIC 1000540 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Measuring Instruments 3B SCIENTIFIC 1000540. 3B SCIENTIFIC 1000540 8 pages.

Print Page

•

A small window will open so that you can

search for the driver software. Click "Find

driver software on this computer" in the

window.

•

Click "Select from a list of device drivers on

this computer".

•

Click the "Medium..." button.

•

Click the "Browse..." button and select the

path for the driver.

•

Click "Yes" to confirm that the file should

be overwritten.

7.2 Software installation

Note on installing the software

For this software, please refer to the installa-

tion instructions available in the 3B NETlab™

software manual.

8. Operating without a computer

Operating a 3B NETlog™ device without a

computer is achieved by using the buttons on

the operating panel. The functions of these

buttons may change according to the operation

being undertaken.

Note: a menu selection can be can-

celled at any time by using the

←

Channel

button.

8.1 Battery level and temperature display

•

Switch on the 3B NETlog™ device by

pressing the On/Off button.

Press the Date/Time ↵ button.

•

The following should appear on the display:

e.g.:

BATTERY: 100%

TEMP.: 22.0°C

8.2 Setting the time

•

Switch on the 3B NETlog™ device by

pressing the On/Off button.

Press the Date/Time ↵ button twice (the

•

time field will appear on the display).

Press the Store ↓ button (the input field for

•

SET TIME will appear on the display).

Specify the desired time in the input field

•

by pressing the Rate ↑ or the Store ↓ but-

ton and use the Channel ← button to skip

between the hours, minutes and seconds

fields.

Confirm by pressing the Date/Time ↵ but-

•

ton.

8.3 Setting the date

•

Switch on the 3B NETlog™ device by

pressing the On/Off button.

Press the Date/Time ↵ three times (the

•

date field will appear on the display).

Press the Store ↓ button (the input field for

•

SET DATE will appear on the display).

•

Specify the desired date in the input field

by pressing the Rate ↑ or Store ↓ button

and use the Channel ← button to skip be-

tween the year, month and day fields.

Confirm by pressing the Date/Time ↵ but-

•

ton.

8.4 Application as a handheld device for

measuring current and voltage

•

Set up the 3B NETlog™ equipment.

•

Connect the voltage/current input of chan-

nel A or B, as desired.

•

If necessary, disconnect any sensor which

might be connected to the same channel.

Setting and selecting measurement parame-

ters:

Press the Channel ← button (the menu

•

DISPLAY SIGNAL 1 will appear on the

display).

•

Select the desired measurement parame-

ter with the Rate ↑ or Store ↓ button.

•

Select the mode of operation with the

Date/Time ↵ button (the menu RANGE

SIGNAL 1 will appear on the display).

•

Select the desired mode of operation with

the Rate ↑ or Store ↓ button.

Confirm this selection with the Date/Time ↵

•

button (the menu DISPLAY SIGNAL 2 will

appear on the display).

•

Select the desired measurement parame-

ter with the Rate ↑ or Store ↓ button.

•

Select the desired mode of operation with

the Rate ↑ or Store ↓ button.

•

Confirm

the

Date/Time ↵ button (a dot will appear in

front of the respective measurement pa-

rameter when operating manually).

The 3B NETlog™ device is ready to conduct

measurements.

8.5 Application as a handheld measuring

device with sensors

•

Set up the 3B NETlog™ equipment.

•

Connect the sensor to the relevant input

and remove the connections of the 4-mm

sockets from the same channel.

selection

with

the